EXPEIQ exhibition booth design — 9 × 6 m

Design of a 54 m² exhibition booth open on four sides for EXPEIQ, an AI marketing agency: reception, a 5.7 m LED wall, a lounge and a coffee counter — 15 3D views and a walkthrough film.

3D visualisation of the EXPEIQ exhibition booth — front-left corner: reception, LED wall and lounge from the main aisle

Gallery

3D Visualisation

3D visualisation of the EXPEIQ exhibition booth — left side elevation, open side at eye level

3D visualisation of the EXPEIQ exhibition booth — right side elevation with the louvre screen at eye level

3D visualisation of the EXPEIQ exhibition booth — back elevation: lightbox face and coffee counter

3D visualisation of the EXPEIQ exhibition booth — aerial view of the whole 54 m² booth

3D Visualisation

3D visualisation of the EXPEIQ exhibition booth — detail of the coffee counter from the barista side: a row of four drawers with storage doors below

3D visualisation of the EXPEIQ exhibition booth — detail of the reception desk from the staff side: drawers, a knee space and a bar chair

Walkthrough film

3D Visualisation

Project type

3D Concept Visualisation — Not Physically Built. This is an exhibition booth design project for EXPEIQ (an AI marketing agency, by Expertise House): concept, 3D visualisation, shop drawings and quantities. The booth has not been built or installed. The pictures and the film are visualisations produced from the 3D model.

The brief

A 9 × 6 m booth (54 m²) on a raised 100 mm platform, open on all four sides, with two partial feature walls, kept to a low execution cost: a premium look comes from lighting and detailing rather than from a ceiling or rigging. The venue and event are not fixed.

The design

A 5.7 m LED wall with pilasters divides the booth into a front lounge and a back zone, and carries the EXPEIQ film and brand. A reception desk with a backlit logo panel welcomes visitors at the front corner, a coffee counter with a fluted Electric Blue panel and a bilingual Arabic–English graphic anchors the back corner, and meeting tables sit under focused spotlights.

Brand

The EXPEIQ identity is used as supplied in the client's Brand Kit: Electric Blue #2563FF and Ink Navy #0A0F1C, the primary logo and wordmark unchanged, and blue LED edge lighting on the platform.

Materials and details

Electric Blue lacquer on the reception end, coffee counter and pilaster fins
Ink Navy lacquer on the back face of the timber feature wall
An oak-look timber slat wall and a louvre screen
A raised platform with an anodised aluminium edge and LED strip
Provisional colours and finishes until physical samples are approved

What was delivered

15 3D views, including a top view and close-ups of the reception and coffee counter
A 107-second walkthrough film
Shop drawings (SD-00 to SD-16) and a quantity take-off without prices
A virtual-reality walkthrough of the unbuilt design for headsets, prepared for the client's review

Structural, electrical and organiser approvals by licensed parties are outside this design set.

Service: Exhibitions & Booths · Related service: 3D Visualisation · Sector: Exhibitions & Events

EXPEIQ exhibition booth design — 9 × 6 m

What kind of project is it?